top of page

3 Quick Fixes [member edit]

For all 10MW Plus members


In this one I’m returning to the Wolfcraft Master 1600 portable bench with three quick fixes that make it significantly more usable and work around some of the odd design decisions. Enjoy!


Register an interest in the 10MW MultiJig, or the 10minuteworkshop MFT Plus jig, at 10minutejigs.com * or directly with this link:-



*If you were an early adopter of the 10MW Loose Tenon Jig you might find that the .com link redirects to the old site; please use the direct link above to register an interest, and please clear your browser cache - it’s been a couple of years!


+++++++++


Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate,  I will earn from qualifying purchases made through these links, and many thanks if you do.


Browse my Amazon store at 10MinuteAmazon.com


Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr


+++++++++


Other videos and playlists of interest:-


Bargain or Burden; first look at woodcrafts ‘MFT’ -  https://youtu.be/pqy8IUnLDY4


3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE



MFT & MFT-related Playlist - http://bit.ly/MFT-related


+++++++++


Useful links:


Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM


Visit my Amazon store here - 10MinuteAmazon.com


Benchdogs products gifted without obligation:-






Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH

12 Comments


hi Peter,

Just been re watching this video regarding the clamping what about the match fit dovetail clamping kit would that work ?


Graham

Like

Hello Peter, I have noticed that you are using a sacrificial strip on your MFT but I am wondering what is the drawback to not have it?

Like
Replying to

It just extends the life of the MFT top; if you don’t have one then every time you make a cut you cut into it, and it wears away eventually. 👍

Like

Great video Peter, makes the wolfcraft an attractive proposition. Just need a 10MW Mft jig!!

Like
Replying to

😂 All part of the plan! 👍👍

Like

Paul
Paul
Apr 12

Yep, I agree with Peter S., the "Wack-A-Doodle Extrusion" it is! With those tweaks, if that bench were available here in the USA and I wanted a portable one, I'd buy one. Doing just those 3 mods will work great for a large majority of the tasks I want an MFT to do. As for the t-slots on the short sides, is it possible to route them out enough to accept Festool compatible clamps, etc.?

Like
Replying to

Here’s Paul! 🙌👍

Like

I have been properly in tears & frustration doing the final dialling-in on the track adapter for this extrusion to get it just right. Happy to say that today it’s done.

I think we can coin the name, from now on to be known as the wolfcraft wack-a-doodle extrusion.


Like
10MW New Header.jpg
EmbeddedImage.png
bottom of page