For all 10MW Plus members
In this one I take a 2024 look at the state of guide rails from OEMs and third parties to help you choose which rails are worth the money and and which are best avoided. Enjoy!
=======================
Related content:
=======================
Lidl Parkside plunge saw - https://youtu.be/kFyDGdH66HM
Skil saw or plunge saw - https://youtu.be/cV3DjNlZq8s
Making connections; the essential guide to guiderail connectors - https://youtu.be/fAhSvhD2zEo
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Evolution R185 CSSX Li saw - https://youtu.be/HtJFtP-kDPI
One Smaller Stool - https://youtu.be/KDe7ZQO83mE
Metabo's £200/$250 'MFT' - https://youtu.be/aWozkUUDdc8
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Benchdogs Ultra MFT Workstation First Look - https://youtu.be/qZK7BWI-PH0
Excel £80 mini-me MFT - https://youtu.be/wtaUuaV54Xk
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
Direct video link - https://youtu.be/hLAv8_6cmDM
=======================
Newsletter and memberships:
=======================
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
=======================
Store:
=======================
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
=======================
Affiliate Links:
=======================
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Portable workbenches - https://amzn.to/4csRhOW
Tracks and tracksaw accessories - https://amzn.to/3XU5tLK
Hi Peter, what’s your advice on longer guide rails, e.g. suitable to cut a full sheet down for a TS55?
I have a Festool 800 and a LR32 1400 rail, the shorter being a good size for the MFT and the longer can use for full sheet cross cuts, but together they’re too short for a lengthwise sheet.
I did make my own full length rail as per your guide rail series but despite best care I’m not convinced the rib is 100% sub-mm straight, so its ‘OK’ for ripping sheet but I’d not really want to use it for the final cut.
The Festool FS/2700 is a very ‘spendy’ £350 so that’s ruled out. I think it’s a toss-up…
Those Evolution rails are excellent. If I needed more rails I'd absolutely get the "value" pack with the 2 rails, bag and clamps.
Phenomenal 👍
Let's see if i can get a Ryobi rail here in Germany 😉